Description
TECHNICAL PARAMETERS
Type : Three-way line array system
Frequency Response : 65Hz-18KHz±3dB
Power handling : LF 700W(RMS)2800W(PEAK)
MF+HF 250W(RMS)1000W(PEAK)
Sensitivity : LF 103dB(1W@1M)
MF+HF 107dB(1W@1M)
Max SPL : LF 132dB(PEAK)
MF+HF 138dB(PEAK)
Drivers : LF 2×10″(260mm) neodymium woofer75mm(3in)coil
MF 1×8″(210mm) neodymium woofer 50mm(2in)coil
HF 2×3″ neodymium compression driver with 75mm titanium diaphragm
Nominal impedance : LF 8 ohm
MF+HF 8 ohm
Coverage : 80°H×10°V
Connections : LF 1(+)1(-) MF+HF 2(+)2(-)
Connectors : 2×NL4MP speakon
PHYSICAL PARAMETERS
Finish : Textured high-density polyurethane coating
Enclosure Material : Birch Plywood
Crossover : LF 65Hz-1KHz HF 1KHz-18KHz
Dimensions : 700×310×520mm(W×H×D)
Packing Dimensions : 590×780×410mm(W×H×D)0.19cbm
Net weight : 40kg(W-310)/44kg(W-310P)
Gross weight : 44kg(W-310)/48kg(W-310P)
POWER AMPLIFIER PARAMETERS
Amplifier type : Switching mode amplifier, class D circuit
Power Output (RMS) : 2X900W/8ohm
Weight : 3.8kg
Configuration : The amp module is built inside W-310P
TECHNICAL PARAMETERS
Model : W-180&W-180P
Type : Line array subwoofer system
Frequency Response : 35Hz-200Hz±3dB
Power handling : 1000W(RMS)4000W(PEAK)
Sensitivity : 102dB(1W@1M)
Max SPL : 136dB(PEAK/1M)
Driver : 1×18″(460mm) woofer 100mm(4in)coil
Nominal impedance : 8 ohm
Connectors : 2×NL4MP speakon
PHYSICAL PARAMETERS
Finish : Textured high-density polyurethane coating
Enclosure Material : Birch Plywood
Dimensions : 700×520×780mm(W×H×D)
Packing Dimensions : 770×590×860mm(W×H×D)/0.39cbm
Net weight : 63.5kg(W-180)/66kg(W180P)
Gross weight : 67.5kg(W-180)/70kg(W180P)
POWER AMPLIFIER PARAMETERS
Amplifier type : Switching mode amplifier, class D circuit
Power Output (RMS) : 900W/8ohm
Weight : 2.6kg
Configuration : The amp module is built inside W-180P