W-3/W-21 & W-3P/W-21P Two-way line array system&Line array subwoofer system

W-3P/W-21P is a new design cabinet,feature with a 12 inch woofer and two 2.5 inch tweeters carrying bright and clear sound;wherever low frequency extension is required,a 21 inch line array subwoofer W-21P compensate and coordinate to make the sound field evenly balanced;All neodymium woofers and drivers applied in both W-3P/W-21P ensures the system in high performance and low weight at the same time.W-3P/W-21P built-in Class D amplifiers use high-level electronic components,with reasonable circuit design and better heat dissipation.The maximum vertical coverage angle can reach 110°in W-3P system up to 16pcs.

รหัสสินค้า: W-3/W-21 & W-3P/W-21P หมวดหมู่: , ป้ายกำกับ:

คำอธิบาย

TECHNICAL PARAMETERS

Type : Two-way Line array system

Frequency Response : 55Hz-18KHz±3dB

Power handling : LF 600W(RMS)2400W(PEAK)
HF 200W(RMS)800W(PEAK)

Sensitivity : LF 105dB(1W@1M)
HF 109dB(1W@1M)

Max SPL : LF 131dB(PEAK/1M)
HF 135dB(PEAK/1M)

Drivers : LF 1×12″(310mm)neodymium woofer 75mm(3in)coil
HF 2×2.5″ neodymium compression driver with 65mm titanium diaphragm

Nominal impedance : 8 ohm

Coverage : 110º H×10º V

Connectors : 2×NL4MP speakon

Connections : LF 1(+)1(-) HF 2(+)2(-)

PHYSICAL PARAMETERS

Finish : Textured high-density polyurethane coating

Enclosure Material : Birch Plywood

Dimensions : 600×347×451mm(W×H×D)

Packing Dimensions : 675×447×520mm(W×H×D)/0.16cbm

Net weight : 28.5kg(W-3)/31.5kg(W-3P)

Gross weight : 33kg(W-3)/36kg(W-3P)

POWER AMPLIFIER PARAMETERS

Amplifier type : Switching mode amplifier,class D circuit

Power Output(RMS) : 2X900W/8ohm
2X1300W/4ohm

Weight : 3.8kg

Configuration : The amp module is built inside W-3P

TECHNICAL PARAMETERS

Model : W-21&W-21P(Active)

Type : Line array subwoofer system

Frequency Response : 30Hz-400Hz±3dB

Power handling : 1500W(RMS)6000W(PEAK)

Sensitivity : 109dB(1W@1M)

Max SPL : 138dB(PEAK/1M)

Drivers : 1×21″(545mm)neodymium woofer 115mm(4.5in)coil

Nominal impedance : 8 ohm

Connectors : 2×NL4MP speakon

PHYSICAL PARAMETERS

Finish  : Textured high-density polyurethane coating

Enclosure Material : Birch Plywood

Dimensions : 600×650×750mm(W×H×D)

Packing Dimensions : 825x675x760(W×H×D)/0.42cbm

Net weight : 70kg(W-21)73kg(W-21P)

Gross weight : 73kg(W-21)78kg(W-21P)

POWER AMPLIFIER PARAMETERS

Amplifier type : Switching mode amplifier,class D circuit

Power Output(RMS) : 2600W/8ohm

Weight : 3.8kg

Configuration : The amp module is built inside W-21P