W-25 & W-12P Two-way line array system&Line array subwoofer system

W-25 is a line array system which is made of two 5″ woofers, a 1.4″ compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. Wherever low frequency extension is required, a W-25 will integrate seamlessly with W-12P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-25 is very versatile and scalable for a wide range.

รหัสสินค้า: W-25 & W-12P หมวดหมู่: , ป้ายกำกับ:

คำอธิบาย

TECHNICAL PARAMETERS

Type : Two-way line array system

Frequency Response : 80Hz-20KHz±3dB

Power capacity : 200W(RMS)800W(PEAK)

Sensitivity : 91dB(1W/1M)

Max SPL : 110dB(PEAK/1M)

Drivers : LF 2×5″(135mm)woofer with 25mm (1in) coil

HF 1×1.4″neodymium compression driver with 34mm titanium diaphragm

Nominal impedance : 16 ohm

Coverage : 110º H×9º V

Connectors : 2×NL4MP speakon

PHYSICAL PARAMETERS

Dimensions : 410×163×248mm(W×H×D)

Packing Dimensions : 610×25.5×47.5mm(W×H×D)/0.07cbm

Enclosure Material : HDPE

Net weight : 6.5kg

Gross weight : 14.5kg

TECHNICAL PARAMETERS

Model : W-12P

Type : Line array subwoofer system

Frequency Response : 50Hz-600Hz±3dB

Power capacity : 700W(RMS)2800W(PEAK)

Sensitivity : 97dB(1W/1M)

Max SPL : 127dB(1W/1M)

Drivers: 1×12″(310mm)woofer with 100mm (4in) coil

Nominal impedance: 8 ohm

Connectors : 2×NL4MP speakon

PHYSICAL PARAMETERS

Finish : Textured paint

Enclosure Material : Plywood

Dimensions : 408×392×494mm(W×H×D)

Packing Dimensions : 490×480×575mm(W×H×D)/0.13CBM

Net weight : 27.5kg

Gross weight : 29.5kg

POWER AMPLIFIER PARAMETERS

Amplifier type : Switching mode amplifier,class D circuit

Power Output(RMS) : 2X900W/8ohm

Other functions : DSP Built-in

Weight : 6.0kg

Configuration : The amp module is built inside W-12P,Which is designed to power 4/W-25+1/W-12P