Description
TECHNICAL PARAMETERS
Type : Two-way line array system
Frequency Response : 65Hz-18KHz±3dB
Power handling : LF 350W(RMS)1400W(PEAK)
HF 110W(RMS)440W(PEAK)
Sensitivity : LF 101dB(1W@1M)
HF 103dB(1W@1M)
Max SPL : LF 128dB(PEAK/1M)
HF 131dB(PEAK/1M)
Drivers : LF 1×10″(260mm)neodymium woofer 75mm(3in)coil
HF 1×3″ neodymium compression driver with75mm titanium diaphragm
Nominal impedance : LF 16 ohm
HF 16 ohm
Coverage : 110º H×10º V
Connectors : 2×NL4MP speakon
Connections : LF 1(+)1(-)
HF 2(+)2(-)
PHYSICAL PARAMETERS
Finish : Textured high-density polyurethane coating
Enclosure Material : Birch Plywood
Dimensions : 280×440×455mm(W×H×D)
Packing Dimensions : 350×520×525mm(W×H×D)/0.1cbm
Net weight : 18kg（W-110B)/20kg(W-110BP)
Gross weight : 21.5kg（W-110B)/23.5kg(W-110BP)
POWER AMPLIFIER PARAMETERS
Amplifier type : Switching mode amplifier, class D circuit
Power Output (RMS) : DSP 900W/8ohm
Weight : 2.6kg
Configuration : The amp module is built inside W-110BP
TECHNICAL PARAMETERS
Model : W-215&W-215P
Type : Line array subwoofer system
Frequency Response : 40Hz-300Hz±3dB
Power capacity : 1600W(RMS)6400W(PEAK)
Sensitivity : 102dB(1W/1M)
Max SPL : 135dB(1W/1M)
Drivers : 2×15″(380mm)woofer with 100mm (4in) coil
Nominal impedance : 4 ohm
Connectors : 2×NL4MP speakon
Connections : LF 1(+)1(-)
PHYSICAL PARAMETERS
Finish : Textured high-density polyurethane coating
Enclosure Material : Birch Plywood
Dimensions : 440×700×800mm(W×H×D)
Packing Dimensions : 510×780×870mm(W×H×D)/0.35CBM
Net weight : 71kg（W-215B)/73kg(W-215BP)
Gross weight : 76kg（W-215B)/78kg(W-215BP)
POWER AMPLIFIER PARAMETERS
Amplifier type : Switching mode amplifier, class D circuit
Power Output (RMS) : 2x900W/8ohm
Weight : 3.8kg
Configuration : The amp module is built inside W-215P
