T-308 & T-115BP line array column system&Line array subwoofer system
T-308 & T-115BP line array column system&Line array subwoofer system - Image 2
T-308 & T-115BP line array column system&Line array subwoofer system - Image 3
T-308 & T-115BP line array column system&Line array subwoofer system - Image 4
T-308 & T-115BP line array column system&Line array subwoofer system - Image 5

T-308 & T-115BP line array column system&Line array subwoofer system

The T-308 is a line array column system comprised of Eight 3.5″ neodymium magnet transducers housed in an elegant and sturdy stainless steel chassis. The ten closely spaced cone drivers provide true line array characteristics-phase coherence, low distortion and focused listening in both the near field, and at a distance from the speaker.

T-115BP is a 15″ subwoofer, specifically designed to reproduce deep bass frequencies with maximum efficiency, speed and impact. It is also ideal for reproducing the concentrated energy of contemporary music environments such as discos, clubs and outdoor shows where extreme level of bass is required. The T-115BP with power amp module and incorporated DSP.
รหัสสินค้า: T-308 & T-115BP หมวดหมู่: , ป้ายกำกับ:

คำอธิบาย

TECHNICAL PARAMETERS

Type : Line arry Column system

Frequency Response : 150Hz-18KHz±3dB

Power handling : 250W(RMS)1000W(PEAK)

Sensitivity : 96dB(1W@1M)

Max SPL : 116dB(PEAK/1M/1W)

Speaker driver : 8×3″(88mm)20mm(0.8in)coil

Nominal impedance : 8 ohm

Coverage : 80º

Connectors : 2×NL4MP speakon

PHYSICAL PARAMETERS

Enclosure Material : Aluminum

Dimensions : 104×714×119mm(W×H×D)

Packing Dimensions : 185×830×340mm(W×H×D)/0.05cbm

Net weight : 4kg

Gross weight : 5.5kg

TECHNICAL PARAMETERS

Model : T-115P

Type : Line array subwoofer system

Frequency Response : 42Hz-600Hz±3dB

Power capacity : 800W(RMS)3200W(PEAK)

Sensitivity : 103dB(1W/1M)

Max SPL : 131dB(PEAK/1M/1W)

Drivers : 1×15″(380mm)woofer with 100mm (4in) coil

Nominal impedance : 8 ohm

Connectors : 2×NL4MP speakon

PHYSICAL PARAMETERS

Finish : Textured paint

Enclosure Material : Plywood

Dimensions : 420×550×490mm(WHD)

Packing Dimensions : 490×635×560mm(WHD)/0.17CBM

Net weight : 34kg

Gross weight : 37.5kg

POWER AMPLIFIER PARAMETERS

Amplifier type : Switching mode amplifier,class D circuit

Power Output(RMS) : 2X900W/8ohm

Other functions : DSP Built-in

Weight : 3.8kg

Configuration : The amp module is built inside T-115P,Which is designed to power 2xT-308&1xT-115P

 

สินค้าที่เกี่ยวข้อง