คำอธิบาย
ES925H/FM5 Specifications
|
Element
|
Fixed-charge back plate permanently polarized condenser
|
|
Polar Pattern
|
Hypercardioid
|
|
Frequency Response
|
30 ~ 20,000 Hz
|
|
Open Circuit Sensitivity
|
-40 dB (10.0 mV) re 1V at 1 Pa
|
|
Impedance
|
130 Ω
|
|
Maximum Input Sound Level
|
140 dB SPL, 1 kHz at 1% T.H.D.
|
|
Dynamic Range (Typical)
|
112 dB, 1 kHz at Max SPL
|
|
Signal-To-Noise Ratio
|
66 dB, 1 kHz at 1Pa
|
|
Switch
|
Mic On/Off;
LED color selector |
|
Phantom Power
|
22-52V DC, 8 mA
|
|
Controls
|
Closure input voltage : -0.5 ~ 5.5 V;
Maximum permissible power : 200 mW; On-resistance : 100 ohms |
|
LED Indicators
|
Active : high (+5V DC) TTL compatible / low (+1.2V DC) or lower;
Maximum permissible input power -0.5 – 5.5 V; Maximum permissible power 200 mW |
|
Weight
|
ES925H6/FM5: 110 g;
ES925H12/FM5: 134 g; ES925H15/FM5: 139 g; ES925H18/FM5: 144 g; ES925H21/FM5: 149 g; ES925H24/FM5: 154 g |
|
Dimensions
|
ES925H6/FM5: 207.6 mm (H) x 38 mm (W) x 48 mm (D);
ES925H12/FM5: 315.0 mm (H) x 38 mm (W) x 48 mm (D); ES925H15/FM5: 391.2 mm (H) x 38 mm (W) x 48 mm (D); ES925H18/FM5: 467.4 mm (H) x 38 mm (W) x 48 mm (D); ES925H21/FM5: 543.6 mm (H) x 38 mm (W) x 48 mm (D); ES925H24/FM5: 619.8 mm (H) x 38 mm (W) x 48 mm (D) |
|
Output Connector
|
5-Pin XLRM-type
|
|
Accessories Furnished
|
Isolator 1 pair; Nut;
Windscreen AT8109a; Set screw (M2×2 mm) 2 pcs.; Hex wrench (0.89 mm) |
- Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
- Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
- Logic I/O capability permits control of remote devices from the power module‘s touch-sensitive capacitive-type user switch
- Power module with 5-pin XLR output mounts unobtrusively in tabletops
- Designed for professional sound reinforcement and other commercial sound applications
- Interchangeable condenser microphone elements provide full-range, natural sound
- Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
- Included isolators provide mechanical dampening of mounting surface vibration
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Includes foam windscreen
- Available in six lengths
