ES925H/FM3 Hypercardioid Condenser Gooseneck Microphone with 3-Pin Flush-Mount Power Module

The ES925H/FM3 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a hypercardioid condenser microphone element, gooseneck and a 3-pin flush-mount power module.

รหัสสินค้า: ES925H/FM3 หมวดหมู่: , ป้ายกำกับ:

คำอธิบาย

ES925H/FM3 Specifications

Element
Fixed-charge back plate permanently polarized condenser
Polar Pattern
Hypercardioid
Frequency Response
30 ~ 20,000 Hz
Open Circuit Sensitivity
-40 dB (10.0 mV) re 1V at 1 Pa
Impedance
180 Ω
Maximum Input Sound Level
140 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (Typical)
112 dB, 1 kHz at Max SPL
Signal-To-Noise Ratio
66 dB, 1 kHz at 1Pa
Switch
Mic On/Off;
LED color selector
Phantom Power
22-52V DC, 8 mA
Weight
ES925H6/FM3: 110 g;
ES925H12/FM3: 134 g;
ES925H15/FM3: 139 g;
ES925H18/FM3: 144 g;
ES925H21/FM3: 149 g;
ES925H24/FM3: 154 g
Dimensions
ES925H6/FM3: 207.6 mm (H) x 38 mm (W) x 48 mm (D);
ES925H12/FM3: 315.0 mm (H) x 38 mm (W) x 48 mm (D);
ES925H15/FM3: 391.2 mm (H) x 38 mm (W) x 48 mm (D);
ES925H18/FM3: 467.4 mm (H) x 38 mm (W) x 48 mm (D);
ES925H21/FM3: 543.6 mm (H) x 38 mm (W) x 48 mm (D);
ES925H24/FM3: 619.8 mm (H) x 38 mm (W) x 48 mm (D)
Output Connector
3-Pin XLRM-type
Accessories Furnished
Isolator 1 pair; Nut;
Windscreen AT8109a;
Set screw (M2×2 mm) 2 pcs.;
Hex wrench (0.89 mm)
  • Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
  • Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
  • Capacitive touch switch enables local muting of the microphone
  • Power module with 3-pin XLR output mounts unobtrusively in tabletops
  • Designed for professional sound reinforcement and other commercial sound applications
  • Interchangeable condenser microphone elements provide full-range, natural sound
  • Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
  • Included isolators provide mechanical dampening of mounting surface vibration
  • Available interchangeable elements permit angle of acceptance from 90° to 360°
  • Small-diameter gooseneck design permits highly flexible positioning
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Includes foam windscreen
  • Available in six lengths

The ES925H/FM3 is available in the following models and lengths:

  • ES925H6/FM3: 207.6 mm
  • ES925H12/FM3: 315.0 mm
  • ES925H15/FM3: 391.2 mm
  • ES925H18/FM3: 467.4 mm
  • ES925H21/FM3: 543.6 mm
  • ES925H24/FM3: 619.8 mm