คำอธิบาย
| Microphones | |
|---|---|
| Frequency Response | 20-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Maximum Input Sound Level | -10 dBu @ +30 dB gain -20 dBu @ +40 dB gain -30 dBu @ +50 dB gain |
| Signal-to-Noise Ratio | 68 dB, 1 kHz at 1 Pa |
| Power Requirements | PoE IEEE802.3af standard (Power consumption 1.5W) |
| Phantom Power Requirements | 12V DC |
| Switches | Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB; Phant |
| Switches | Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB; Phantom power: 12V DC, off Remote Mode: Low-cut and Gain via third-party software* |
| Weight (Microphone) | 770 g (27.2 oz) |
| Weight | 770g |
| Dimensions | 133.0 mm (5.24″) maximum length, 93.8 mm (3.69″) maximum width, 46.2 mm (1.82″) maximum height |
| Output Connector | Physical level: standard Ethernet Input Connector: 3-pin XLRF-type |
| Notes | Dante Network Specifications Connector: single RJ45 Cable quality: Shielded CAT5 or CAT6 recommended Transmission speed: 100 Mbps |
Features
- Connects directly to network via Ethernet cable – no need for expensive audio cable or soldering
- Integrated user switch controls talk/mute in Local mode and triggers Dante-enabled devices in Remote mode
- 3-pin XLRF-type in for quick mounting of gooseneck microphone
- Red/green LED indicator
- Local or remote control of mic gain, low-cut filter, LED indicator and 12V phantom power
- Powered by network PoE
- Scalable across Dante’s 512 bidirectional audio channels
- UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Plug-and-play compatibility with AES67 networks, including those that utilize Livewire, RAVENNA and Q-LAN AoIP technologies
- Increases Dante Domain Manager features, adding role-based security, cross-subnet routing, SNMP alerts and more
