คำอธิบาย
| General | |
| Power requirement | PoE (IEEE 802.3af Class 0) |
| Power consumption | Max. 7 W |
| Operation temperature range | 0°C to 40°C (32°F to 104°F) |
| Operation humidity range | 25% to 85% (Non condensing) |
| Dimensions | 227.5mm (9.0”) x 227.5mm (9.0”) x 30mm (1.2”) (W x D x H) |
| Weight | 1250 g (44 oz) |
| Microphone | |
| Beam width | 90° |
| Polar pattern | Beam pattern |
| Frequency Response | 60 Hz to 18,000 Hz |
| Sensitivity | -8 dBFS (1 kHz, 94 dBSPL) |
| Dynamic Range | 89 dB (A-weighted) |
| Signal to noise ratio | 61.5 dB (A-weighted) |
| Self-noise | 25 dBSPL (A-weighted) |
| Maximum input sound level | 102 dBSPL |
| Analogue Audio | |
| Frequency response | 20 Hz to 20 kHz (+1.0/-2.0 dB) |
| Dynamic range | 100 dB (A-weighted) |
| Signal to noise ratio | 80 dB (A-weighted) |
| Headroom | 20 dB |
| Residual noise | -75.8 dBu (A-weighted) |
| T.H.D. | <0.1% (1 kHz, unity) |
| Analogue input | MIC Maximum: -30 dBu
MIC Unity: -50 dBu LINE Maximum: +12.2 dBu LINE Unity: -10 dBV, Switchable |
| Analogue output | OUTPUT Maximum: +19.2 dBu
OUTPUT Unity: +4 dBu/ -10 dBV/ -33 dBV, Switchable |
| Others | |
| Network | Dante: 1 Gbps
IP control: 100 Mbps |
| Digital audio | Sampling rate: 48 kHz
Bit depth: 24 bit |
| Latency | Microphone (CH1 to CH6): 47 msec
Microphone (Auto Mix CH): 79 msec Dante: Min. 250 usec, Max. 5 msec |
| I/O connector | Network/ Dante: RJ-45
Analogue input: Euroblock 3 pin Analogue output: Euroblock 3 pin GPI: Euroblock 3 pin |
| Phantom power | Analogue input: 12 V |
| Included accessories |
|
KEY FEATURES
- The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small
- Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
- User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings
- Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
- Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
- Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
- Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
- Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
- Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)
- Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount
- UL 2043 compliant for installation in plenum spaces
- Includes tile bridge, safety wiring, and mounting hardware and accessories
- Low-reflective white finish matches ceiling tiles in most environments
- Powered by network PoE
