คำอธิบาย
Element : Fixed-charge back plate, permanently polarized condenser
Polar Pattern : Cardioid
Frequency Response : 40 – 20,000 Hz
Low Frequency Roll Off : 80 Hz, 12 dB/octave
Open Circuit Sensitivity : –49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level : 159 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range : 130 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio : 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements : 11– 52V DC, 3.5 mA typical
Switches : Flat, roll-off
Weight (Microphone) : 14.5 g (0.5 oz)
Weight (Power Module) : 90 g (3.2 oz)
Cable : 4.0 m (13.1′) long (permanently attached to microphone), 3.2 mm (0.13″) diameter, 2-conductor shielded cable with HIROSE HR10-type connector
Dimensions (Power Module) : 92 mm (3.62″) long,
18.9 mm (0.74″) diameter
Dimensions (Microphone) : 37.8 mm (1.49”) long,
12.2 mm (0.48”) maximum body diameter
Output Connector (Power Module) : Integral 3-pin XLRM-type
Optional Interchangeable Elements : UE-H hypercardioid (100°);
UE-O omnidirectional (360°)
Accessories Included : ATM350a cardioid condenser microphone; AT8543 power module; AT8491W UniMount® woodwind mount; AT8490 UniMount® 5″ gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case
Audio-Technica Case Style : M36
Features
- Low-profile mic design for minimum visibility
- Crisp, clear, well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- UniMount® woodwind mount attaches securely to any woodwind instrument via a flexible strap, providing excellent shock resistance for the microphone
- Rugged UniMount® 5″ gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
- In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Included violin mount with hook-and-loop fastener provides an additional mounting option
