คำอธิบาย
| Microphone | |
|---|---|
| Element | Back electret condenser | 
| Polar Pattern | Cardioid | 
| Frequency Response | 60 – 15,000 Hz (@ 2 cm) | 
| Open Circuit Sensitivity | –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz) | 
| Maximum Input Sound Level | 140 dB SPL (1 kHz THD1%) | 
| Dynamic Range | 106 dB (1 kHz at Max S.P.L.) | 
| Signal-to-Noise Ratio | 60 dB (1 kHz at 1 Pa, A-weighted) | 
| Phantom Power Requirements | 11 – 52V DC, 2 mA | 
| Dimensions | Height: 12.7 mm (0.5”), Minimum width: 12 mm (0.47”) | 
| Output Connector | TB6M | 
| Headphones | |
| Type | Closed-back Dynamic (Headphone) Cardioid Condenser (Microphone) | 
| Driver Diameter | 45 mm (Headphone) | 
| Frequency Response | 15-28,000 Hz (Headphone) | 
| Maximum Input Power | 1,600 mW at 1 kHz (Headphone) | 
| Maximum Output | 1,600 mW | 
| Sensitivity | 102 dB (Headphone) | 
| Impedance | 38 ohms (Headphone) | 
| Weight | 240 g (8.5 oz) | 
| Cable | Detachable 3.0 m (9.8′) long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8″) phone plug (headphone) outputs | 
| Connector | TB6M jack | 
| Magnet | Neodymium (Headphone) | 
| Voice Coil | Copper-clad aluminum wire | 
| Microphone Type | Cardioid Condenser | 
| Accessories Included | Pouch; 3 windscreens; cable clip; 6/3 mm (1/4″) screw-on adapter | 
Features
- Low-profile, closed-back, on-ear design provides excellent isolation and fit
- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction
- Carefully crafted using key metal components for lasting durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement








