คำอธิบาย
Microphone | |
---|---|
Element | Back electret condenser |
Polar Pattern | Cardioid |
Frequency Response | 60 – 15,000 Hz (@ 2 cm) |
Open Circuit Sensitivity | –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz) |
Maximum Input Sound Level | 140 dB SPL (1 kHz THD1%) |
Dynamic Range | 106 dB (1 kHz at Max S.P.L.) |
Signal-to-Noise Ratio | 60 dB (1 kHz at 1 Pa, A-weighted) |
Phantom Power Requirements | 11 – 52V DC, 2 mA |
Dimensions | Height: 12.7 mm (0.5”), Minimum width: 12 mm (0.47”) |
Output Connector | TB6M |
Headphones | |
Type | Closed-back Dynamic (Headphone) Cardioid Condenser (Microphone) |
Driver Diameter | 45 mm (Headphone) |
Frequency Response | 15-28,000 Hz (Headphone) |
Maximum Input Power | 1,600 mW at 1 kHz (Headphone) |
Maximum Output | 1,600 mW |
Sensitivity | 102 dB (Headphone) |
Impedance | 38 ohms (Headphone) |
Weight | 240 g (8.5 oz) |
Cable | Detachable 3.0 m (9.8′) long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8″) phone plug (headphone) outputs |
Connector | TB6M jack |
Magnet | Neodymium (Headphone) |
Voice Coil | Copper-clad aluminum wire |
Microphone Type | Cardioid Condenser |
Accessories Included | Pouch; 3 windscreens; cable clip; 6/3 mm (1/4″) screw-on adapter |
Features
- Low-profile, closed-back, on-ear design provides excellent isolation and fit
- Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
- Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction
- Carefully crafted using key metal components for lasting durability
- Low-impedance design delivers high output level from any headphone output
- Boom-mounted microphone can be positioned on the left or right side
- Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
- Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
- Earpads and headband detach for easy replacement