คำอธิบาย
Control channels : 30 channels: CH1 ~ CH30
Alarm tone : Shorted signal
Alarm input : ALARM (1~30)
Alarm output : 3 GROUPS ALARM OUT (1~10), ALARM OUT (11~20)，ALARM OUT (21~30)
Number of adjacent zones : 0 ±1 ±2 ±3 ±4
Controls : Power switch, address setting (1 digit),adjacent zone selector
Indicators : POWER indicator, CH1 ~ CH30 alarm state indicators
Protection : AC FUSE 0.5A 1
Power : AC 220V 10% 50 -60Hz
Power consumption : 15~20W
Dimensions : 89(H) 483(W) 350(D) mm
Neight weight : 6.42KG
• Adjacent zone selector
The rear panel of the unit has an adjacent zone selector, which when the first code is dialed denotes adjacent zone 0
(1 zone will be alarmed when there is a fire alarm in one zone.), when the Second code is dialed denotes adjacent zone 1 (3 zones will be alarmed when there is a fire alarm in one zone.), when the third code is dialed denotes 2 (5 zones will be alarmed), when the fourth code is dialed denotes 3 (7 zones will be alarmed), when the fifth code is dialed denotes 4 (9 zones will be alarmed). Notice: only one code can be dialed down a time.
• Alarm to adjacent floors
In case there is an alarm in a zone and the adjacent number is N. The alarm matrix will send alarm to N adjacent zones. If it happens on a floor, N floors above that floor and N floors under that floor will be alarmed.
In case there is an alarm in a zone and the adjacent number is N. The alarm matrix will send alarm to N adjacent zones. If it happens on a floor, N floors above that floor and N floors under that floor will be alarmed.
